8' Protector XL Benchtop Laboratory Fume Hood

Protector XL I-S Benchtop Laboratory Hoods

Protector XL I-S Benchtop Laboratory Hoods are general chemistry hoods that offer superior design flexibility.They are available in widths from 3 to 8 feet and two depths to meet a variety of installation and application requirements.

Designed for use with Intelli-Sense Multi-Speed Blowers, Protector XL I-S Benchtop Hoods feature integrated sash position blower controls.As the sash is raised or lowered, sensors alert the blower to change speeds to maintain a safe face velocity.That face velocity is displayed on the factory-installed Guardian™ Digital Airflow Monitor for users' peace of mind.

These hoods are suitable for providing personal protection needed for general chemistry applications involving fumes and vapors.They meet the SEFA-1 standard of a low velocity, high performance hood and may be safely operated as low as 60 fpm.

SEE OUR SUSTAINABILITY INITIATIVES

These panel-lined benchtop hoods offer superior design flexibility for general chemistry applications.Plus, they offer automatic blower speed adjustment via integrated sash position sensors.

Features (All Models)

By-pass airflow design
Eco-Foil™ Air Foil with aerodynamic Clean-Sweep™ airflow openings
Cord-Keeper™ Slots on left and right side of air foil
Factory-installed Intelli-Sense Blower control box
Factory-installed sash position activated blower speed switches
Factory-installed Guardian™ Digital Airflow Monitor
Glacier white powder-coated steel exterior
Chemical-resistant, fiberglass-reinforced, composite panel liner and baffle
Opti-Zone™ Baffle with flame spread index less than 25 per ASTM E84.Baffle is removable for cleaning
Tempered safety glass vertical-rising sash(es) with cable and pulley(s) and powder-coated aluminum sash handle(s)
37.5" (95.3 cm) high sightline from the work surface and header panel
Removable front and side panels, and front and interior service access panels for access to plumbing and electrical wiring
Pre-wired LED lighting with vapor-proof design and ADA-compliant light and blower switches.Lighting rated to 50,000 hours.
Powder-coated stainless steel, 12.8" (32.5 cm) ID exhaust connection(s)

Fixtured Models May Feature

Two pre-plumbed service fixtures with forged brass valves, lower right side with brass tubing for gas and lower left side with copper tubing for cold water.Components for converting either or both fixtures to air and vacuum are provided.Inlet tubing is not provided.
One pre-wired GFCI electrical duplex receptacle on lower right side and, on 8' models only, one additional pre-wired GFCI electrical duplex receptacle on lower left side

Required Accessories (Not Included)

Intelli-Sense Multi-Speed Remote Blower (without control box)
Ductwork
Work Surface
Base Cabinet or Stand
Dedicated Exhaust

Optional Accessories

Service Fixture Kits (Some models include service fixtures)
Electrical Duplex Kits (Some models include electrical duplex)
Distillation Grid Kits
Sash Stop Kits
Ceiling Enclosure and Rear Finish Panel Kits

Compliance

CFR 29, Part 1910
Exceed SEFA 1 definition when tested to ASHRAE 110
NFPA 45
ASTM E84-09C
ANSI Z9.5
UL 61010-1
CAN/CSA C22.2 No.61010-1
UL 1805
CE Conformity Marking (230 volt models)
SEFA 8
必威平台官网首页ADA (Contact Labconco for ADA-compliant models)

Our Product Representatives Are Here To Help

必威平台官网首页Labconco Fume Hood Airflow Demonstration

必威平台官网首页Labconco Protector Fume Hoods include the XStream, the most energy-efficient ducted fume hood design, as well as other high performance ducted fume hoods in our Premier and XL lines.This video demonstrates the airflow and safety features of all our Protector Fume Hood models.

Chemical Fume Hood Installation

必威平台官网首页This video shows how to install a Labconco Protector Fume Hood.This video features a Protector XStream Fume Hood, and most installations are similar.

How the I-S Fume Hood Saves Energy

This animation shows how the Protector I-S works with a laboratory air supply's pressure differential switch to save energy.When the sash is lowered, blower speed is automatically reduced to conserve the room's tempered air.

Literature & Resources

Brochures
- Protector XStream I-S, Premier I-S and XL I-S Laboratory Fume Hoods Brochure
  
  This brochure contains descriptions, dimensional data and ordering information on Protector XStream I-S, Premier I-S and XL I-S Laboratory Fume Hoods.These hoods feature integrated sash position sensors linked to the factory-installed Intelli-Sense Blower control box.The required blowers are listed.Standards related to hoods are also provided.
  
  View Files
User's Manuals
- Protector XL Laboratory Hoods Manual
  
  For Protector XL and Protector XL I-S Benchtop fume hoods with catalog numbers: 1110, 1111, 1112, 1113, 1114, 1115, 1116, 1117 and 1118 series.
  
  View Files