Protector Airo Filtered Fume Hoods

The Protector Airo Filtered Fume Hood requires no ducting and is available in 3' and 4' widths and 31.7" and 37.7" depths.Neutrodine® Unisorb Filtration Technology offers comprehensive molecular filtration.eGuard® communication software offers real-time monitoring on the user's phone or computer.From a remote location, data such as usage authorization, filter saturation detection, sash position and temperature may be observed and managed.

Erlab-proven Neutrodine® Unisorb Filters are the heart of GFH Filtration Technology.

Benchtop models include a fiberglass panelized liner.Models are available for carbon-only, carbon with acid sensor, carbon with formaldehyde sensor, or HEPA-only filtration.Filters are sold separately.To determine if your application is right for a Protector Airo, pleaserequest a Chemical Assessment必威平台官网首页from a Labconco specialist who can recommend the appropriate enclosure and filters for your application.

*Available only in the Americas, filters required

Versatile filtered fume hood for limited benchtop space.必威平台官网首页Labconco's fully-featured Protector fume hood platform, with Erlab's Neutrodine Unisorbfilter technology.

Features (All Models)

Eco-Foil™ air foil with aerodynamic Clean-Sweep™ airflow openings
Cord-Keeper™ Slots on left and right side of air foil
Removable front and side panels, and front and interior service access panels for access to plumbing and electrical wiring
By-pass airflow design
Glacier white powder-coated steel exterior
Chemical-resistant, fiberglass-reinforced, composite panel liner
Pre-wired vapor-proof LED lights for up to 63 foot candles rated for 50,000 hours
eGuard2 software communication
Factory-installed command module, fan button and light button
Roughing prefilter
Built-in exhaust fans to maintain 60 fpm face velocity at 16" sash opening height
Sound pressure of <60 dB(A) with sash at operating height and <48 dB(A) with sash closed
Sensor package for primary filter breakthrough of solvent and acid fumes, laboratory air quality, sash position, and temperature
Audible/visual alarms for breakthrough detection, temperature ≥40° C (104° F), fan failure and high sash position opening.At ≥60° C (140° F), all fans stop
Single piece, tempered safety glass vertical-rising sash with cable pulley, sash weight and powder-coated aluminum sash handle and tracks with airflow openings.Sash stop at 16" sash opening height on 4' models and 13" sash opening height on 3' models.Sash opens to 26" high for loading
Factory-prepared for up to two electrical duplex receptacles and four service fixtures
28.5" high sightline from the work surface and header panel
Power cord with plug

Fixtured Models May Feature

Two pre-plumbed service fixtures with forged brass valves, lower right side with brass tubing for gas and lower left side with copper tubing for cold water.Components for converting either or both fixtures to air and vacuum are provided.Inlet tubing is not provided
One pre-wired GFCI electrical duplex receptacle on lower right side

Required Accessories (Not Included)

Neutrodine® Unisorb Filters (except HEPA only models which require HEPA filters).Number of filters required is determined by the width of the hood
Work Surface
Base Cabinet or Stand

Options Available Include

HEPA filter
Region-specific electrical plug configurations
Service fixtures

Compliance

SEFA 9, DHIII
SEFA 8, Cabinet Surface Finish Tests
Modified ASHRAE 110
ANSI Z9.5-2011
AFNOR NF-X 15-211
ASTM E84-09C
UL Standard 61010-1
CAN/CSA C22.2 No.61010-1

Our Product Representatives Are Here To Help

Benefits of Protector Echo & Airo Filtered Fume Hoods Unique Features

This video shows how filtered fume hoods completely eliminate the largest expense of maintaining a laboratory.Patented features for safety, filtration and connectivity make these hoods uniquely adaptable for a wider variety of uses than any ducted hood.

Quick and Easy Echo and Airo Filtered Fume Hood Installation

必威平台官网首页Labconco Protector Echo and Airo Filtered Fume Hoods are simple to install because they require no ductwork.One of the fastest ways to expand your lab or create flex space for chemical work.

Literature & Resources

Brochures
- Protector Echo and Airo Filtered Fume Hoods Brochure
  
  This brochure provides an overview, features & benefits, specifications, ordering information, dimensional data and accessory ordering information on the Protector Echo and Airo Filtered Fume Hoods.
  
  View Files
- Spanish-Language Protector Echo and Airo Filtered Fume Hoods Brochure
  
  This Spanish-language brochure provides an overview, features & benefits, specifications, ordering information, dimensional data and accessory ordering information on the Protector Echo and Airo Filtered Fume Hoods.En français.
  
  View Files
User's Manuals
- Protector Echo and Airo Filtered Fume Hoods Manual (2020-Present)
  
  For models with the following part numbers manufactured September 2020 to present.
  180 Series – 4', 5', 6' and 8' Protector Echo
  181 Series – 4', 5', 6' and 8' Protector Echo with side glass
  182 Series – 4', 5', 6' and 8' Protector Echo with 360 degree visibility
  183 Series – 4', 5', 6' and 8' Protector Echo Floor-Mounted
  184 Series – 3' and 4' Protector Airo
  
  View Files
3-Part Specs
- Protector Airo Filtered Fume Hoods Specification
  
  View Files
CAD Drawings
- 3' Protector Airo Filtered Fume Hood
  
  Protector Airo Filtered Fume Hood - 3' wide , 31.7" depth.
  
  View Files
- 4' Protector Airo Filtered Fume Hood
  
  Protector Airo Filtered Fume Hood - 4' wide , 37.7" depth.
  
  View Files
Revit
- 3' Protector Airo Revit Files
  
  View Files
- 4' Protector Airo Revit Files
  
  View Files
Installation Qualification / Operation Qualification
- Installation Qualification/Operation Qualifications Protocol for Protector Echo and Airo Series Laboratory Fume Hood
  
  For validation of predetermined Protector Echo and Airo Series Laboratory Fume Hood specifications.Provides a checklist of installation and operation qualifications to complete when beginning operation on new or used Protector Echo and Airo Series Laboratory Fume Hoods.
  
  View Files

Search

Protector Airo Filtered Fume Hoods

Features (All Models)

Fixtured Models May Feature

Required Accessories (Not Included)

Options Available Include

Compliance

Our Product Representatives Are Here To Help

Application Specialists

Application Specialist

Product Service

Service Advisor

Benefits of Protector Echo & Airo Filtered Fume Hoods Unique Features

Quick and Easy Echo and Airo Filtered Fume Hood Installation

Literature & Resources

Brochures

Protector Echo and Airo Filtered Fume Hoods Brochure

Spanish-Language Protector Echo and Airo Filtered Fume Hoods Brochure

User's Manuals

Protector Echo and Airo Filtered Fume Hoods Manual (2020-Present)

3-Part Specs

Protector Airo Filtered Fume Hoods Specification

CAD Drawings

3' Protector Airo Filtered Fume Hood

4' Protector Airo Filtered Fume Hood

Revit

3' Protector Airo Revit Files

4' Protector Airo Revit Files

Installation Qualification / Operation Qualification

Installation Qualification/Operation Qualifications Protocol for Protector Echo and Airo Series Laboratory Fume Hood

&#98;&#101;&#116;&#119;&#97;&#121;&#23448;&#32593;&#19979;&#36733;&#97;&#112;&#112;Related Products

betway官网下载appRelated Products