Protector Filtered Glove Boxes

Protector Filtered Glove Boxes provide inlet and outlet HEPA or ULPA filtration and a leak-tight physical barrier to protect the operator from exposure to potentially hazardous materials.

必威平台官网首页These glove boxes feature particulate containment <20 nanograms per cubic meter as confirmed by Safebridge Consultants, Incorporated and also meet ISO Class 3 standards. Labconco HEPA Filtered Glove Boxes may be appropriate for use as containment isolators for applications that include compounds assignedOEB4 andOEB5 Banding Levels.Contact your Health and Safety Officer for specific Engineered Containment Device requirements.

These stainless steel or fiberglass-lined ventilated glove boxes feature inlet/outlet HEPA or ULPA filtration to protect the operator from hazardous materials.

Features

• Particulate containment <20 nanograms per cubic meter as confirmed by SafeBridge Consultants, Incorporated.
• Fast "clean up time." 0.05 ppm average tracer gas levels or less detected during perimeter scan testing (surpasses ASHRAE 110 standards) after 5 minute dilution.
• Airborne particulate cleanliness (measured under positive and negative pressures per ISO 14644-1 test method) exceeds ISO Class 5 conditions (equivalent to Class 100) and achieves ISO Class 4 conditions.
• Factory leak-tested with a mass spectrometer while pressureized with helium at 1 inch of water gauge.No detectable leaks greater than 1 x 10^-6ml/sec.
• Inlet and outlet particulate (HEPA or ULPA) filters to prevent contaminants from entering or leaving the glove box chamber.
• Test port for challenging HEPA or ULPA filter integrity.
• True Bag-In/Bag-Out Filter Disposal System for safe filter removal and replacement.
• LCD display provides real time monitoring of volume dilution rates in cubic feet per minute (CFM), air changes/minute (ACM), and main chamber pressure (inches of water).
• Built-in blower with speed control capable of airflow from 15 CFM to 85 CFM.
• Large viewing area, 36" w x 27.6" high, provides maximum visibility.Viewing window is 3/8" thick, laminated safety glass.
• Space-saving inner and outer transfer chamber doors that pivot upward, are counterbalanced and equipped with quick-latches.
• Interior right-hand side wall-mounted pass-through plug for on-site installation of an optional accessory: electrical outlet, RS-232 port, gas/liquid port, or port for oxygen or moisture monitor.
• Pair of neoprene gloves, 0.015" thick, 30" long, size 9 ¾.
• Switches for light, blower and electrical duplex.
• Two 8" ID, epoxy-coated aluminum double-grooved glove ports mounted 17" apart, with neoprene gaskets.
• Two 25-watt fluorescent lights that exceed 100 footcandles.
• Dry-powder epoxy-coated, 18 and 20 gauge steel exterior panels.

Options

• Chemical resistant, one-piece molded fiberglass liner or type 304 stainless steel liner
• Clear acrylic inner and outer transfer chamber doors (fiberglass-lined models)
• Type 304 stainless steel inner and outer transfer chamber doors and front panel (stainless steel-lined models)
• Inlet and outlet HEPA (fiberglass-lined models) or ULPA (stainless steel-lined models) filters
• Protector Stainless Steel Double Filtered Glove Boxes have 81.84" of interior working width and four glove ports
• International electrical configuration

Required Accessories

• Adjustable Height Base Stands

Optional Accessories

• Balance Vibration Isolator
• Anti-Static Ionizer Fan
• Gloves and Glove Box Accessories
• HEPA Inlet or Exhaust Filter

Our Product Representatives Are Here To Help

Protector Filtered Glove Boxes

必威平台官网首页Video outlining the features and benefits of Labconco's Protector Filtered Glove Boxes.Protector Filtered Glove Boxes provide inlet and outlet HEPA or ULPA filtration and a leak-tight physical barrier to protect the operator from exposure to potentially hazardous materials.These glove boxes feature particulate containment under 20 nanograms per cubic meter as confirmed by Safebridge Consultants, Incorporated and also meet ISO Class 3 standards.

Connecting Gas and Vacuum to a Glove Box

必威平台官网首页This instructional video shows how to connect gas and vacuum to a Labconco Glove Box with Auto Pressure Controller.必威平台官网首页Contact Labconco with additional questions not addressed in this video.

Literature & Resources

Brochures
- Protector Glove Boxes Catalog
  
  Provides an overview, features and benefits, specifications, ordering information and dimensional data on Protector Filtered Glove Boxes, Protector Controlled Atmosphere Glove Boxes, Protector Combination Glove Boxes and AtmosPure Re-Gen Gas Purifiers.Accessories and Base Stands are also described.
  
  View Files
User's Manuals
- Protector Filtered Glove Box Manual
  
  For Protector Filtered Glove Boxes manufactured after November 2010
  
  View Files
White Papers
- 必威平台官网首页Independent testing proves Labconco ULPA filtered glove box contains aerosolized nanomaterials effectively
  
  必威精装版维护时间Labconco Corporation submitted its Protector® Stainless Steel ULPA Filtered Glove Box to an independent source to evaluate its ability to contain aerosolized nanomaterials...
  
  View Files
Installation Qualification / Operation Qualification
- Installation Qualification/Operation Qualification for Protector HEPA and ULPA Filtered Glove Boxes
  
  For validation of predetermined Protector HEPA Filtered and ULPA Filtered Glove Box specifications.Provides a checklist of installation and operation qualifications to complete when beginning operation on a Protector HEPA Filtered or ULPA Filtered Glove Box.
  
  View Files
Declarations of Conformity
- CE Declaration of Conformity - Protector Filtered Glove Box
  
  Declaration of Conformity for applicable models of the Protector Filtered Glove Box
  
  View Files
- ETL Authorization Mark for Protector Glove Boxes
  
  This document from Intertek authorizes the use of the ETL mark on Protector Glove Boxes.
  
  View Files

Search