Protector XStream I-S Fume Hood on Cabinet

Protector XStream Laboratory Hoods

The Protector XStream Laboratory Hood takes containment, safety and energy savings to the extreme.This general chemical, high performance fume hood was independently tested and challenged well beyond the SEFA-1 standards.With a face velocity of 40 fpm and sash fully open, the Protector XStream was subjected to 50 fpm cross drafts, NIH protocol, and tracer gas measurements in the chest of the mannequin.In all scenarios, the Protector XStream allowed 0.00 ppm average level of tracer gas outside the fume hood.Although your safety officer will determine the actual face velocity setting for your laboratory, the ability of this hood to contain under these adverse conditions sets a new standard of safety.

Safety is foremost, but energy savings is equally impressive.Although face velocity is a factor, it's the volumetric rate (CFM) that determines the energy consumption.Operating a 6' Protector XStream at 60 fpm face velocity, with the sash in its fully open position, requires only 690 CFM.Regardless of your desired operating face velocity, the Protector XStream yields the lowest required CFM of any hood.

SEE OUR SUSTAINABILITY INITIATIVES

Use Our Product Selection Tools

Scout™ Lab Equipment Selector

Let Scout lead you to the right laboratory hood or sample prep equipment for your application.

These energy-efficient benchtop hoods have containment-enhancing features that allow them to operate at face velocities as low as 60 fpm.

Features (All Models)

By-pass airflow design with variable air volume compatibility
Eco-Foil Air Foil with aerodynamic Clean-Sweep airflow openings
Cord-Keeper Slots on left and right side of air foil
Upper Dilution Air Supply
Glacier white powder-coated steel exterior
Rear Downflow Dual Baffle System
Chemical-resistant, fiberglass-reinforced, composite panel liner and baffles with flame spread index less than 25 per ASTM E84.Baffles are removable for cleaning
Opti-Zone Baffle with tapered slots
Tempered safety glass vertical-rising sash with cable and pulley
Powder-coated sash handle with aerodynamic Clean-Sweep openings
37.5" (95.3 cm) high sightline from the work surface to the header panel
Removable front and side panels, and front and interior service access panels for access to plumbing and electrical wiring
Pre-wired LED lighting with vapor-proof design and ADA-compliant light and blower switches.Lighting is rated for 50,000 hours
Sash stop located at 18" (45.7 cm) sash opening position
Powder-coated stainless steel, 12.8" (32.5 cm) ID exhaust connection(s).

Fixtured Models May Feature

Two pre-plumbed service fixtures with forged brass valves, lower right side with brass tubing for gas and lower left side with copper tubing for cold water.Components for converting either or both fixtures to air and vacuum are provided.Inlet tubing is not provided
One pre-wired GFCI electrical duplex receptacle on lower right side and, on 8' models only, one additional pre-wired GFCI electrical duplex receptacle on lower left side

Required Accessories (Not Included)

Remote blower
Ductwork
Work surface
Base cabinet or stand

Optional Accessories

Service Fixture Kits (Some models include service fixtures)
Electrical Duplex Kits (Some models include electrical duplex)
Guardian Airflow Monitor Kits
Sash Stop Kits
Tissue Screen Kit
Distillation Grid Kits
Ceiling Enclosure and Rear Finish Panel Kits

Our Product Representatives Are Here To Help

必威平台官网首页Labconco Fume Hood Airflow Demonstration

必威平台官网首页Labconco Protector Fume Hoods include the XStream, the most energy-efficient ducted fume hood design, as well as other high performance ducted fume hoods in our Premier and XL lines.This video demonstrates the airflow and safety features of all our Protector Fume Hood models.

Chemical Fume Hood Installation

必威平台官网首页This video shows how to install a Labconco Protector Fume Hood.This video features a Protector XStream Fume Hood, and most installations are similar.

Protector XStream Chemical Fume Hood

必威平台官网首页This video explains the key features of the Protector XStream Chemical Fume Hood from Labconco, yielding the greatest possible laboratory safety and lowest operating cost.

High Efficiency Fume Hood Airflow Demonstrations

See airflow demonstrations using smoke to show some of the innovative and highly effective features that make the Protector XStream® the most effective containing fume hood.Watch the airfoil sill, upper dilution air supply, sash handle and sash track direct air into the fume hood's baffles without causing dangerous, containment disrupting turbulence.

Fume Hoods Overview 2013

Meet Manny (ASHRAE 110 Testing)

Being an ASHRAE 110 testing mannequin is a dirty job, but some dummy's got to do it.Manny is just the guy for the job.Check out this video to get an idea of how we test our fume hoods to ensure they provide proper protection.

Literature & Resources

Brochures
- Protector Laboratory Fume Hoods Brochure – XStream, Premier and XL
  
  This brochure contains descriptions, dimensional data and ordering information on Protector XStream, Premier and XL Laboratory Fume Hoods and SpillStopper Work Surfaces.Optional features including the Intelli-Sense Automatic Sash Position System, Chain and Sprocket, and Auto-Return Sash Systems are described.Standards related to hoods are also provided.
  
  View Files
- 必威平台官网首页Labconco Sustainability Initiatives
  
  betway官网下载appBrochure describes Labconco's corporate green initiatives and Labconco products that contribute to energy savings, sustainability and innovated design.
  
  View Files
- French-Language Protector Laboratory Fume Hoods Brochure
  
  This French-language brochure contains descriptions, dimensional data and ordering information on Protector XStream, Premier and XL Laboratory Fume Hoods and SpillStopper Work Surfaces.Optional features including the Intelli-Sense Automatic Sash Position System, Chain and Sprocket, and Auto-Return Sash Systems are described.Standards related to hoods are also provided.En français.
  
  View Files
User's Manuals
- Protector XStream Laboratory Hoods Manual
  
  For Protector XStream and Protector XStream I-S Laboratory Fume Hoods 11041, 11051, 11061 and 11081 Series.
  
  View Files
- Intelli-Sash User Instruction Manual
  
  Instruction for the use of the Intelli-Sash Automoatic Sash Position system available on Protector Fume Hoods.
  
  View Files
- Protector XStream Laboratory Fume Hoods (pre-9/12) Manual
  
  For catalog numbers (discontinued):9840400, 9840401, 9840402, 9840403, 9840500, 9840501, 9840502, 9840503, 9840600, 9840601, 9840602, 9840603, 9840800, 9840801, 9840802, 9840803
  
  View Files
En Español
- Campanas extractoras para laboratorios Protector y Basic
  
  Proporciona beneficios, especificaciones y fotos.必威平台官网首页La protección del entorno de su laboratorio es el fundamento del desarrollo de nuestros productos y cada campana extractora Labconco está diseñada pensando en la seguridad.必威平台官网首页Cuando los ingenieros de Labconco diseñaron la más reciente generación de campanas extractoras para laboratorios Protector XStream, Premier y XL, en adición a la seguridad, consideraron el ahorro en el consumo de energía.
  
  View Files
- Protector XL Hottes aspirantes montées au sol
  
  Este folleto cubre las especificaciones, la información sobre pedidos y las dimensiones de las campanas Protector de piso.
  
  View Files
White Papers
- Protector XStream Fume Hood White Paper
  
  必威平台官网首页This 8-page white paper describes the development of the Labconco Protector XStream High Performance Laboratory Fume Hood.
  
  View Files
- Protector XStream Hood Third Party Test Results
  
  This AccuTec Services, Inc.report shows that the Protector XStream Hood was tested beyond the SEFA-1† standards.With a face velocity of 40 fpm and sash completely open, the Protector XStream was subjected to 50 fpm cross drafts, NIH† protocol, and tracer gas measurements in the chest of a mannequin.In each scenario, the Protector XStream allowed 0.00 ppm average level of tracer gas outside the fume hood.
  
  View Files
3-Part Specs
- Protector XStream Laboratory Fume Hood Specifications
  
  This specification covers Protector XStream Laboratory Hoods manufactured September, 2012 and after.
  
  View Files
Installation Qualification / Operation Qualification
- Installation Qualification/Operation Qualifications Protocol for Protector Series Laboratory Fume Hood
  
  For validation of predetermined Protector Series Laboratory Fume Hood specifications.Provides a checklist of installation and operation qualifications to complete when beginning operation on new or used Protector Series Laboratory Fume Hoods.
  
  View Files
Declarations of Conformity
- CE Declaration of Conformity - Protector XStream Hoods
  
  For 11041 Series, 11051 Series, 11061 Series, and 11081 Series Protector XStream Laboratory Fume Hoods
  
  View Files